Memorex MT3010OM - Manual (Page 26)

25
TV OPERATION (CONTINUED)
DISPLAY VIDEO MODE
Press to select a mode (PRESET, SOFT or USER) as set
on page 29.
NOTE: You cannot change the audio MODE while using
the Y Pb Pr or computer inputs..
1
AUDIO MODE
Press and the picture will disappear from the screen, but
the sound will still be heard.
1
VIDEO MUTE
CHANNEL LOCK
Press the DISPLAY button once to show the time. Press
again to show the mode (i.e. S-VIDEO). Press a third time
to clear the screen or wait three seconds and the screen
will clear automatically.
1
Press to select a mode (PRESET, SOFT or USER) as set
on page 28.
NOTE: You cannot change the video MODE while using
the Y Pb Pr or computer inputs.
1
SRS
This feature allows the TV’s left and right speakers to
provide a surround sound effect.
Press to cycle through the surround modes as follows:
SURROUND 1: Simulated stereo
SURROUND 2: Stereo surround
SURROUND 3: Mono surround
SURROUND OFF: To turn off surround sound.
1
Channel Lock provides instant access to one of your
favorite channels at the touch of a button. To set, go to the
channel you want to set as the channel lock, then press
and hold the CHANNEL LOCK button on the remote until
the on-screen display shows “LOCKED”; the channel is
now locked in. To access, simply press the CHANNEL
LOCK button on the remote and the TV will automatically
tune to that channel.
1