Maxim Integrated MAX1402 - Manual (Page 2)

Evaluate: MAX1400/MAX1402
MAX1402 Evaluation Kit/Evaluation System
2 _______________________________________________________________________________________
Quick Start
Recommended Equipment (USB Port/PC
Connection Option)
Before beginning, the following equipment is needed:
• MAX1402 EV system:
MAX1402 EV kit
68HC16MODULE-DIP
USBTO232 (USB cable included)
• A DC power supply that generates +8VDC to
+12VDC at 30–50mA
• A user-supplied Windows 2000/XP computer with an
available USB port to connect to the USBTO232
board
Note: In the following sections, software-related items
are identified by bolding. Text in bold refers to items
directly from the EV kit software. Text in bold and
underlined refers to items from the Windows 2000/XP
operating system.
Connections and Setup
The MAX1402 EV kit is fully assembled and tested.
Follow the steps below to verify board operation.
Caution: Do not turn on the power supply until all
connections are completed.
1) Visit the Maxim website (www.maxim-ic.com) to
download the latest version of the USBTO232 User
Guide. Follow the steps in the USBTO232 User
Guide Quick Start section and return to step 2 of
this Quick Start section when finished.
2) Make sure your 68HC16MODULE-DIP module has
the Rev. 2.0 ROM. The software will not function
with the Rev. 1.0 ROM.
3) Carefully connect the boards by aligning the 40-pin
header of the MAX1402 EV kit with the 40-pin con-
nector of the 68HC16MODULE-DIP module. Gently
press them together. The two boards should be
flush against one another.
4) Connect the DC power source to the µC module at
terminal block J2, located next to the ON/OFF
Example Source Code Files
68HC16 Source Code Files
Header file for MAX1402.CPP, provided for
reference.
MAX1402.H
Source code module for driving the
MAX1402, provided for reference. Includes
definitions of the register names and low-
level access routines. Compiled with
Borland C++ 4.52. Maxim holds the copy-
right, but allows customers to adapt the
program for their own use without charge.
MAX1402.CPP
Source code defining the program inter-
face with the Maxim 68HC16 Module ROM
(Rev. 2.0).
EVKIT.ASM
Main source code for the KIT1402.C16 pro-
gram, provided for reference. Maxim holds
the copyright, but allows customers to
adapt the program for their own use without
charge.
KIT1402.ASM
MAX1402 EV Kit Files
Windows Application Program Files
Program settings file MAX1402.INI
Software loaded into 68HC16 microcon-
troller.
KIT1402.C16
Help file MAX1402.HLP
Application program that runs under
Windows 98/2000/XP.
MAX1402.EXE
DESCRIPTION FILE
DESCRIPTION FILE
DESCRIPTION FILE
Note: Indicate that you are using the MAX1402 when contacting these component suppliers.
SUPPLIER PHONE FAX WEBSITE
Murata Mfg. Co., Ltd. 770-436-1300 770-436-3030 www.murata.com
TDK Corp. 847-803-6100 847-390-4405 www.component.tdk.com
Component Suppliers