Moxa Technologies 6450 - Manual (Page 20)

4-0 www.moxa.com e-mail: [email protected]
S
e
cu
re
T
e
rm
in
a
l S
e
rv
e
rs
/T
e
rm
in
a
l S
e
rv
e
rs
Secure Terminal Server/Terminal Server
Up to  ports for high density environments
SSL support for secure communication
Secure remote management and configuration with SSH or SSL
Powerful DES, DES, and AES hardware encryption engine
Any baudrate allowed
10/100BaseTx Ethernet port supporting 80.af Power Over
Ethernet (POE) - under development
Port buffers to hold serial data if Ethernet fails
SD slot for optional expansion of port buffers
Slot for network expansion module
6600 Series
Features
8, 16, and 32-port RS-232/422/485 Rackmount Terminal Servers
The NPort 6600 is designed to connect higher densities of serial
devices to the Ethernet. Models are available with 8, 16, or 32
ports. When establishing network connections to a larger number
of serial devices or equipment console ports, greater security may be needed for TCP data. The NPort 6600 supports secure Ethernet
communication between computers and serial devices with DES,
3DES, and AES, three of the most popular standards for data
encryption.
Overview
The NPort 6600 has a built-in LCD control panel that allows data input,
configuration, and mode selection. The panel displays the server name, serial number, and IP address. Parameters such as IP address,
netmask, and gateway, can be quickly and easily modified.
Easy Installation with LCD Control Panel
The NPort 6600 provides adjustable termination, pull high, and
pull low resistors for RS-485 communication. In some critical
environments, termination resistors may be needed to prevent the
reflection of serial signals. Pull high and pull low resistors may also need adjustment so the electrical signal is not corrupted. Since no set
of resistor values works for every environment, the NPort 6600 allows
manual adjustment of the resistor values for each serial port, using
built-in DIP switches.
Adjustable Resistor Values for RS-48
4
IP Systèmes, importateur/distributeur des solutions de communication industrielle MOXA en France Tel : 0820 200 290 (15cts/min)