Miele EGW4060-14 - Manual (Page 17)

Installation Safety Instructions
Before installation make sure that
the voltage and frequency listed on
the data plate correspond with the
household electrical supply. This data
must correspond in order to avoid risk
of damage to the appliance. If in doubt,
consult a qualified technician.
The electrical outlet should be
easily accessible after installing the
unit.
Only install the plate warmer in
combination with built-in
appliances recommended by the
manufacturer. When installed with other
appliances, the warranty is void since
the manufacturer cannot guarantee the
safe use of the plate warmer.
To install the plate warmer in
combination with another
appliance, a built-in shelf must exist in
the cabinet to support the weight of
both appliances.
When installed in combination with
another appliance, the plate
warmer must always be installed
beneath the other appliance. The
combination appliance can be set
without a base directly onto the plate
warmer. A shelf between the
appliances is not necessary.
To install the combination
appliance please see the manual
supplied with that machine.
This appliance is not designed for
maritime use or for use in mobile
installations such as recreational
vehicles or aircraft. However, under
certain conditions it may be possible for
an installation in these applications.
Please contact the Miele Technical
Service Department with specific
requirements.
Built-in measurement
The appliance is available in two
heights: The opening measurement
needed is the summary of the
measurement of the plate warmer and
the combination appliance.
Installation
17