Miele EGW4060-14 - Manual (Page 4)

This appliance is intended for
residential use only. Only use the
appliance for its intended purpose.
Improper use of the appliance can
lead to personal injury and material
damage. The manufacturer cannot
be held responsible for damages
caused by improper use of the plate
warmer.
This appliance complies with current
safety requirements.
Read all instructions before installing
or using for the first time.
Keep these operating instructions in
a safe place and pass them on to
any future user.
Read all operating and installation
instructions for any other appliance
installed in combination with the
plate warmer.
READ ALL INSTRUCTIONS!
Installation
Before installation make sure that
the voltage and frequency listed on
the data plate correspond with the
household electrical supply. This data
must correspond in order to prevent
injury and machine damage. If in doubt,
consult a qualified technician.
The electrical safety of this
appliance can only be guaranteed
when continuity exists between the
appliance and an effective grounding
system. The grounding system must
comply with local and national safety
regulations. It is imperative that this
basic safety requirement be met. If
there is any doubt, have the electrical
system of the house checked by a
qualified electrician.
The manufacturer cannot be held
responsible for the damages caused by
an inadequate grounding system (e.g.
electric shock).
Do not connect the appliance to
the electrical supply with an
extension cord. Extension cords do not
guarantee the required safety of the
appliance.
This appliance must only be used
once it has been properly installed
into cabinetry to ensure that all
electrical components are protected.
Never open the outer casing of the
appliance.
Tampering with electrical connections
or components and mechanical parts is
dangerous and may cause machine
damage.
IMPORTANT SAFETY INSTRUCTIONS
4