Speed cont, Instrumentation – Mercury Mountaineer 2001 User Manual

Page 13

Advertising
background image

Speed control

This light comes on when either the
SET/ACCEL or RESUME controls
are pressed. It turns off when the
speed control OFF control is
pressed, the brake or clutch (if equipped) is applied or the ignition is
turned to the OFF position.

Safety belt warning chime

Sounds to remind you to fasten your safety belts.

For information on the safety belt warning chime, refer to the Seating
and safety restraints
chapter.

Supplemental restraint system (SRS) warning chime

For information on the SRS warning chime, refer to the Seating and
safety restraints
chapter.

Key-in-ignition warning chime

Sounds when the key is left in the ignition in the OFF/LOCK or ACC
position and the driver’s door is opened.

Headlamps on warning chime

Sounds when the headlamps or parking lamps are on, the ignition is off
(and the key is not in the ignition) and the driver’s door is opened.

SPEED

CONT

Instrumentation

13

Advertising