Controls and features – Mercury Mountaineer 2001 User Manual

Page 25

Advertising
background image

windows open. This will force most of the hot, stale air out of the
vehicle. Once the vehicle has been “aired out”, operate the climate
control system as desired.

• Do not put objects under the front seat that will interfere with the

airflow to the back seats (if equipped).

• Remove any snow, ice or leaves

from the air intake area at the
base of the windshield.

• Do not place objects over the defroster outlets. These objects can

block airflow and reduce your ability to see through your windshield.
Avoid placing small objects on top of the instrument panel. These
objects may fall down into the defroster outlets and block airflow, in
addition to damaging the climate control system.

To aid in side window defogging/demisting in cold weather conditions:

1. Select

2. Set the temperature control to full heat

3. Set the fan speed to HI

4. Direct the outer panel vents towards to side windows

To increase airflow to the outer panel vents, close the central panel vents.

Do not place objects on top of the instrument panel as these
objects may become projectiles in a collision or sudden stop.

Controls and features

25

Advertising