Miele EGW602-14 - Manual (Page 14)

The electrical installation instructions
for any appliance installed in combi-
nation with the plate warmer must be
observed.
When another appliance is installed
in combination with the plate warmer
to the same circuit breaker, operat-
ing both appliances at the same
time could cause an overload. If in
doubt consult a qualified electrician.
All electrical work should be done
by a qualified technician, in strict ac-
cordance with national and local
safety regulations.
Installation, repairs and other work
by unqualified persons could be
dangerous and may void the war-
ranty.
Make sure power is not supplied to
the appliance while installation or re-
pair work is being performed.
WARNING:
THIS APPLIANCE MUST BE
GROUNDED
Note to the installer
Please leave these instructions with
the consumer.
Power supply
This appliance is equipped with an
approx. 6 ft (approx. 1.8 m) long power
cord with plug ready for connection to a
120 V, 15 A, 60 Hz power supply.
Electrical connection
14