Miele EGW602-14 - Manual (Page 5)

This appliance is intended for resi-
dential use only. Only use the appli-
ance for its intended purpose.
Improper use of the appliance can
lead to personal injury and material
damage. The manufacturer cannot
be held responsible for damages
caused by improper use of the plate
warmer.
This appliance complies with current
safety requirements.
Read all instructions before installing
or using for the first time.
Keep these operating instructions in
a safe place and pass them on to
any future user.
Read all operating and installation
instructions for any other appliance
installed in combination with the
plate warmer.
READ ALL INSTRUCTIONS!
Technical safety
Before installation make sure that
the voltage and frequency listed on
the data plate correspond with the
household electrical supply. This data
must correspond to prevent injury and
machine damage. Consult a qualified
electrician if in doubt.
The electrical safety of this appli-
ance can only be guaranteed when
continuity exists between the appliance
and an effective grounding system,
which complies with local and national
safety regulations. It is imperative that
this basic safety requirement is tested
by a qualified electrician. The manufac-
turer cannot be held responsible for the
consequences of an inadequate
grounding system (e.g. electric shock).
This appliance must only be used
once it has been installed in
cabinetry to ensure that all electrical
components are shielded.
Never open the outer casing of the
appliance.
Tampering with electrical connections
or components and mechanical parts is
dangerous and can cause machine
damage.
Warning and Safety instructions
5