Call alert operation, Receiving and responding to a call alert, Making a call alert from the contacts list – Motorola 4550 User Manual
Page 45: Advanced features
Advanced Features
English
35
Call Alert Operation
Call Alert paging enables you to alert a specific radio user to call
you back when they are able to do so.
This feature is applicable for subscriber aliases or IDs only and
is accessible through the menu via Contacts or manual dial.
Receiving and Responding to a Call Alert
When you receive a Call Alert page, you see Call Alert that
alternates with the alias or ID of the calling radio on the display.
Procedure:
1
You hear a repetitive tone. The yellow LED blinks.
2
Press the PTT button within four (4) seconds of receiving a
Call Alert page to respond to the Private Call.
OR
Press
N
to exit the Call Alert.
Making a Call Alert from the Contacts List
Procedure:
1
S
to access the menu.
2
P
or
Q
to Contacts and press
N
to select.
3
P
or
Q
to the required subscriber alias or ID and press
N
to select.
4
P
or
Q
to Call Alert and press
N
to select.
5
The display shows Call Alert: <Subscriber Alias or
ID>, indicating that the Call Alert has been sent.
6
The green LED lights up when your radio is sending the Call
Alert.
7
If the Call Alert acknowledgement is received, a tone
sounds and the display shows Call Alert Successful.
OR
If the Call Alert acknowledgement is not received, a tone
sounds and the display shows Call Alert Failed.
You can also send a Call Alert by manually dialing the
subscriber ID (see Making a Call Alert by Manual Dial on
page 68).
NAG_6880309T15.book Page 35 Tuesday, March 9, 2010 11:47 AM