MITSUBISHI ELECTRIC XL2U - Manual (Page 21)

EN – 21
ENGLISH
Mouse remote control
By connecting to personal computer through the USB or PS/2 port, you can operate your computer with the
projector remote control.
Connection
Projector + PC with USB connector
Operation
• Turn off PC and the projector before connecting with PS/2 port. When connecting the PC with the projector
when the personal computer is on, the remote control does not work as a mouse. In that case, turn the projec-
tor on, then restart the personal computer.
• When the projector is connected with USB terminal and RS-232C terminal at the same time, only the termi-
nal which the projector recognizes first will work.
• When you use the RS-232C cable together with an extension cable, the function may not work correctly.
USB
L
S-VIDEO
VIDEO
AUDIO IN VIDEO IN
MAIN
AC IN
R
COMPUTER IN
RS-232C
COMPUTER OUT
to USB port to USB
USB cable
USB 4P
(type B)
USB 4P
(type A)
• You can use the mouse remote control function with computer supported USB only.
• When the lamp is turned ON, the computer connected with the USB cable may not work correctly. In this
case, restart the projector and the computer. If possible, you should disconnect the USB cable when the lamp
is turned ON.
Projector + PC with PS/2 connector
USB
L
S-VIDEO
VIDEO
AUDIO IN VIDEO IN
MAIN
AC IN
R
COMPUTER IN
RS-232C
COMPUTER OUT
to RS-232C
terminal
to mouse
(PS/2) port
PS/2 adaptor
D-SUB 9P Mini DIN 8P D-SUB 9P Mini DIN 6P
RS-232C cable
COMPUTER
VIDEO KEYSTONE
EXPAND
VOLUME LASER
P in P AUTO POSITION
+ –
1 2
MENU ENTER
MUTE STILL 16 : 9
R-CLICK R-CLICK
This operates in the same way as the right
button on the computer mouse.
mouse pointer
Use to move the cursor on the image,
instead of the computer mouse.
left click
This operates in the same
way as the left button on
the computer mouse.