MITSUBISHI ELECTRIC XL2U - Manual (Page 7)

EN – 7
ENGLISH
Bottom side
2
1
1 Lamp cover
2 Adjustment foot
Caution:
Do not replace the lamp right after using the projector. The
lamp is very hot.
COMPUTER
VIDEO KEYSTONE
EXPAND
VOLUME LASER
P in P AUTO POSITION
– +
1
2
3
4
5
6
7
8
9
10
11
20
19
18
21
17
16
15
14
13
12
1 2
MENU ENTER
MUTE STILL 16 : 9
R-CLICK
Remote control 1 Laser aperture
2 Transmission window
3 Indicator
4 POWER button
5 KEYSTONE button
6 EXPAND button
7 + , – (VOLUME) buttons
8 Mouse pointer
9 MENU button
10 STILL button
11 MUTE button (Audio/Video)
12 16 : 9 button
13 ENTER button
14 R-CLICK button (For mouse)
15 Direction buttons
16 LASER button
17 AUTO POSITION button
18 PinP button
19 VIDEO 1, 2 buttons
20 COMPUTER button
21 Left click button (For mouse)
• The + and - buttons are used in the KEYSTONE
adjustment and the EXPAND mode in addition to the
volume control.
• Pressing the LASER button emits a laser beam. Even
when you keep holding down the LASER button, it is
emitted only one minute. To keep emitting it longer,
press the LASER button again.
• You can disable the LASER button to prevent
laser radiation due to misuse of the button.
How to disable the LASER button
While holding the LASER button down, press the
}
button three times.
How to enable the LASER button
While holding the LASER button down, press the
{
button three times.
• When the batteries are changed, the LASER button will
be enabled.
About the laser beam
This remote control is a Class 2 laser product. (Max. output : 1 mW, Wavelength
: 640-660 nm)
Beam Divergence : 6m distance about 10.0mm x 10.0mm (
±
6.0mm)
CAUTION :
• Pressing the LASER button on the remote control emits a laser beam. Do not
look into the laser beam directly. Do not point the laser beam at anyone.
Looking at the laser beam directly may damage eyesight.
• Use of controls or adjustments or procedures other than those specified herein may
result in hazardous radiation exposure.
LASER RADIATION
DO NOT STARE INTO BEAM
WAVE LENGTH: 640-660nm
MAX OUTPUT : 1mW
CLASS 2 LASER PRODUCT
AVOID EXPOSURE-LASER
RADIATION IS EMITTED
FROM THIS APERTURE
C A U T I O N C A U T I O N
Complies with 21 CFR. 1040. 10 AND 1040. 11
IEC 60825-1:1993+A1:1997