Muratec F-520 - Manual (Page 103)

7-2 Appendix & Index
Network setting items list
The following network settings can be setup by using the machine’s control panel or
web browser.
• TCP/IP
This sets the TCP/IP network environment.
• SMTP/POP
This sets the e-mail server settings.
• E-mail Settings
This sets the e-mail /Internet fax settings.
• LDAP Settings
This sets the LDAP server settings.
• Folder Shortcuts
This sets the shortcut of the shared Windows holder.
• FTP Shortcuts
This sets the shortcut of the FTP server.
• Archive Settings
This creates rules for archiving “fax”, “Internet fax”, and “scan to e-mail” commu-
nications.
• Network Settings Code
This sets the protection passcode for the network settings.
• Ping command
Ping the IP address and verify that it responds.
• Show MAC Address
Shows the MAC (Media Access Control) address of your machine’s network board.
 TCP/IP Settings
Item Content Default setting
Control
Panel
Web
Browser
NetBIOS Name Up to 15 characters (Blank)  
Work Group Name Up to 15 characters (Blank)  
DHCP Setting ON / OFF OFF  
IP Address IP address 192.168.1.10  
Subnet Mask IP address 255.255.255.0  
Gateway Address1 IP address (Blank)  
Gateway Address2 IP address (Blank)  
DNS1 IP address (Blank)  
DNS2 IP address (Blank)  
DNS Suffix Up to 50 characters (Blank)  
Primary WINS Address IP address (Blank)  
Secondary WINS Address IP address (Blank)  
HTTP Port No. 0 to 65535 80 
(  : possible to setup.)