Muratec F-520 - Manual (Page 45)

3-16 LDAP server settings
Deleting an LDAP server
1
Press [Setting] on the control panel.
2
Press [Management], [Network Settings], [LDAP Settings], and [LDAP Server
Setting] in this order.
3
Select the LDAP server you want to delete.
4
Press [Server Name].
5
Press [Delete] to clear the server name and press [Enter].
6
Press [IP Address].
7
Press [Clear] to clear the IP Address and press [Enter].
8
When you have finished press [Reset] on the control panel to return to the
Standby mode.