MITSUBISHI ELECTRIC WS-55711 - Manual (Page 43)

42 43
Setup Menu: Edit NetCommand™ Icon Position
Edit NetCommand™ Button
(Figure 1)
The Edit NetCommand™ button displays the Edit
NetCommand™ menu (refer to Edit NetCommand™
section in Part 2 of this book.) Edit NetCommand™
provides the following options:
• ADD - Addition of new devices.
• CHANGE - Change or edit traditional devices
and IEEE 1394 devices.
• DELETE - Delete a single device or delete the
entire setup configuration.
• REVIEW - Review all devices connected to the
TV, including IEEE 1394 devices and turn devices
and unused inputs On or Off.
• INITIAL - Allows initial setup, in the event
NetCommand™ setup was cancelled or if the
entire configuration was deleted.
Figure 1. Setup Menu
Figure 2. Icon Position Menu
Icon Position Menu
(Figure 2)
Selecting the Icon Position menu screen allows
you to arrange the device icon order on the Device
Selection menu to your preferred sequence to make
the operation of the TV easier.
Use ADJUST , , , or to highlight the icon
to be moved and then press ENTer. Use ADJUST
, , , or to move the icon to the desired
position and then press ENTer to secure the icon in
the new position.