Mitel 8560 - Manual (Page 45)

Mitel ® 8560/8660 Phone User Guide – Issue 13, September 2009 Page 31
Call Features
Forwarding Calls
You can use Manual Call Forwarding or System Forwarding to forward calls.
Manual Call Forwarding
You can use Manual Call Forwarding to send incoming calls to another extension or external
number. The following table describes Manual Call Forwarding options.
To use Manual Call Forwarding:
1. Press FWD and then press one of the menu buttons as described in the table above.
ENTER FORWARD DEST appears.
2. Enter the extension number, or press the OUTGOING button or the Outgoing access
code (default code is 8), and then dial the telephone number. You can press the
MESSAGE CENTER menu button to forward calls to the Message Center (voice
mailbox)
1 . FWD ALL CALLS TO <number> appears.
To cancel a Manual Call Forwarding request:
Do one of the following:
•
Press the FWD button, and then press (Speaker), or lift and replace the handset. ANY
CALL FORWARD CANCELED appears.
•
Or press the FWD button, and then press the FWD OFF menu button.
System Forwarding
You can use System Forwarding to route calls based on the type of call and the idle or busy
status of your phone. You cannot program the System Forward destination—you can only turn it
on or off. Contact your system administrator for more information.
To turn System Forwarding on or off:
Dial 354 to turn System Forwarding on. SYSTEM FORWARD ON appears. Dial 354
again to turn System Forwarding off.
Call Forward Feature Description Code/Menu Button
Call Forward if No
Answer All incoming calls are forwarded if not
answered. (The timer is set by the
system administrator.) 356
NO ANSWER
Call Forward If Busy When your phone is busy, all incoming
calls are forwarded without ringing. 357
BUSY
Call Forward If No
Answer/Busy All incoming calls are forwarded if your
phone is busy or if you do not answer. 358
NO ANSWER/BUSY
1. This feature may or may not be enabled for your system.