Memorex MD6441 - Manual (Page 12)

11
CD OPERATION (CONTINUED)
When the memory is full, the fifth dot
(at the right side of the display) will
blink and the disc rotation speed will
drop to save power consumption.
ESP
3
To turn the Anti-Shock System off,
press the ESP/BAND button.
To turn the Anti-Shock System on,
press the ESP/BAND button again.
2
4
NOTES:
•
When the CD player is used in a stable location, turn the Anti-Shock System
off by pressing the ESP/BAND button. When the Anti-Shock System is Off,
battery consumption is less.
• The Anti-Shock System provides for continuous sound output when unit is
subject to vibration, but it will not correct errors, such as a defective or dirty
CD.
• If all the dots disappear and the CD player is subject to immediate vibration,
the unit may skip.
• If the CD player is subject to vibration during playback, the dots will
disappear one by one. During the vibration, the music should continue to
play the signals stored in the memory until the CD player can read the music
data properly from the disc. At this time, the indicator will probably show
fewer dots indicating the music signals stored in memory are low.