Radio operation – Memorex MD6441 User Manual

Page 8

Advertising
background image

7

RADIO OPERATION

Set the VOLUME control

1 to minimum

and plug the headphones into the
PHONES jack. Press the PLAY/PAUSE

(®p)/POWER ON button 2 to turn the
unit on.

1

2

1

TO LISTEN TO THE RADIO

Slide the FUNCTION switch

1 to the

RADIO position. Press the ESP/BAND
button

2 to select a band (AM or FM).

If listening to FM, press the MODE button

to turn FM Stereo ON or OFF.

2

1

3

2

Press and release the Skip/Search/
Tuning

o 1 or n 2 button to tune a

station. Press and hold the Skip/Search/
Tuning

o 1 or n 2 button for Auto Scan

(see below).

2

1

3

3

Adjust the VOLUME control

1 and DBBS

switch

2 as desired. If FM STEREO

reception is weak/noisy, press the MODE
button

3 to turn off Stereo, in this case

the reception will be monaural.

1

2

3

4

To turn the radio off, press the STOP
()/POWER OFF button.

2

5

ANTENNAS
AM
–This unit has a built-in ferrite bar
antenna, which provides adequate reception
in most areas. If reception is weak, turn the
unit to improve reception.
FM–The headphones act as an antenna for
FM. Extend the headphone wire for best FM
reception.

AUTO SCAN
Press and hold the Skip/Search/Tuning

o or

n

button for approximately one second and

the unit will automatically search for the next
available station.

Advertising