Monster Cable PERFECTVIEW 450M - Manual (Page 24)

20
Attaching the Power Unit
to the Installed Mount
Insert the power unit mounting bracket in the
square-shaped slot on the back of the power unit,
as shown to the right.
Secure the power unit mounting bracket to the
power unit with two Phillips screws, labeled “A” on
the hardware bag.
Hang the power unit mounting bracket on the two rivets
protruding from the power unit mounting plate.
Pull the power unit downward to safely secure it on the
power unit mounting plate.
Slide the Quick-Snap screw cap into place over the power
unit mounting plate screw holes.
1)
2)
3)
4)
5)