Philips Magnavox VRZ255 - Manual (Page 10)

10 Turning on Your VCR
3
4
1
5
Before turning on your VCR, make sure there are batteries in the
remote control and the VCR, TV, and Cable Box/DBS (if applica-
ble) are connected.
1
Press the VCR button, then press the POWER button.
2
Turn on the TV. Set it to channel 3 or 4, whichever the
CH3/CH4 switch on the back of the VCR is set to. The
menu shown below will appear.
3
Press the PLAY 8 or STOP 9 button to select the on-
screen display language.
2 Turn on the TV.
5
Press the FF :/OK button to begin automatic channel
setup. AUTO CH. SET PROCEEDING PLEASE WAIT will
appear on-screen. The VCR will memorize all of the channels you
receive, so when you scan through channels using the CH(annel)
8/9 buttons, you’ll only scan through channels that you receive.
4
Press the FF :/OK button. The menu shown below will
appear.
6
When channels are set up, AUTO CH. SET COMPLETED will
appear on-screen briefly.
6 Wait for the VCR to set up
channels.
SELECT , 9
A ENGLISH
ESPAÑOL
FRANÇAIS
MAKE SELECTION OR
PUSH :/OK TO CONTINUE
CONNECT ANTENNA OR CABLE
TO VCR
THEN PUSH :/OK KEY
OR . . .
FOR PLAY ONLY – PUSH STOP
• Auto may appear on the display
panel until the clock is set. After
you connect the antenna/cable sig-
nal to the VCR and connect the
VCR to a power source, the clock
may set itself automatically. The
current time may appear on the
VCR display panel.
• If you do not want to set up chan-
nels now, press the STOP 9 button
at step 5. TUNER NOT SET will
appear on-screen briefly.
• You may not set up channels at
step 5 if you are using a Cable
Box/DBS.
Helpful Hints
1
4
7
SPEED
CBL/DBS
TV VCR
MENU
EXIT/STATUS
TIMER [ REC/OTR
REW
STILL/SLOW
–
L
STOP
PLAY
:
+
S.SEARCH
FF /OK
c EJECT
POWER
2
5
8
0
QUICK PROGRAMMING
3
6
9
START
DBS
STOP
DAILY
DATE
WEEKLY
CLEAR
CH
VOL
VCR/TV 7;; INDEX ::7 AUDIO/MUTE
:: ;;
+
–
+
–