Philips Magnavox VRZ255 - Manual (Page 40)

40 Timer Recording Speed Setting
If a program is recorded in SP and there is not enough tape to
record the entire program, the VCR automatically switches to SLP
to allow complete recording if TIMER REC SPEED is set to
AUTO. This feature is especially useful when you record a pro-
gram that is more than two hours long.
For example, to record a program of 140 minutes in length onto a
120-minute tape, the program is recorded in SP for about 110
minutes and in SLP for about 30 minutes.
1
Press the VCR button, then press the MENU button.
2
Press the PLAY 8 or STOP 9 button to select VCR SET
UP, then press the FF :/OK button.
3
Press the PLAY 8 or STOP 9 button to select TIMER
REC SPEED, then press the FF :/OK button so that
AUTO appears beside TIMER REC SPEED.
4
Press the EXIT/STATUS button.
SELECT , 9 CHOOSE :/OK
A VCR SET UP
TUNER SET UP
INITIAL SET UP
TO END PUSH EXIT
Approximately 110 minutes Approximately 30 minutes
Follow the steps below to set TIMER REC SPEED to AUTO.
SELECT , 9 CHOOSE :/OK
A ON SCREEN MODE ON
TIMER REC SPEED MANUAL
VIDEO STABILIZER OFF
PICTURE NORMAL
AUDIO OUT HIFI
STEREO/SAP STEREO
TO END PUSH EXIT
SP SLP
1
2-3
4
1
4
7
SPEED
CBL/DBS
TV VCR
MENU
EXIT/STATUS
TIMER [ REC/OTR
REW
STILL/SLOW
–
L
STOP
PLAY
:
+
S.SEARCH
FF /OK
c EJECT
POWER
2
5
8
0
QUICK PROGRAMMING
3
6
9
START
DBS
STOP
DAILY
DATE
WEEKLY
CLEAR
CH
VOL
VCR/TV 7;; INDEX ::7 AUDIO/MUTE
:: ;;
+
–
+
–