Magma PCIe Expansion System EB2R - Manual (Page 56)

M A G M A
48
Error Code Description/Action
10
This code indicates that there is a problem with the 3
rd
Party PCIe Card driver.
If necessary, contact the card’s manufacturer for updated
software drivers. If all else fails, contact Magma Technical
Support for further assistance.
On the Bridge: If you receive error code 12 on the first PCI to
PCI Bridge, call Magma Technical Support.
12
On the Card: This usually means the memory, I/O, or prefetch
is more than has been allocated. Call Magma Technical
Support.
Error Code Description/Action
28
The driver for the PCIe card is not installed on your system.
Reinstall the card driver following the manufacturer’s
instructions. If that fails to fix the problem, call the card
manufacturer for new drivers.
1
The PCIe host card or expansion chassis are not working
correctly. Reinstall the PCIe host card into the computer’s slot
and recheck all cable connections. If the error code remains,
try another PCIe slot. If the error persists, call Magma
Technical Support.
Other Codes
For all other error codes, call:
On the PCI to PCI Bridge: Magma Technical Support
On the Card: Card Manufacturer’s Technical Support, after
first verifying that the Magma expansion system is installed
properly.
If you are still having problems, contact Magma Technical Support for
more help.