Magma PCIe Expansion System EB2R - Manual (Page 36)

M A G M A
28
Install Hard Drive(s)
The EB2 chassis can accommodate up to two 3.5” or 2.5” hard drives.
Before installing hard drives in your system you should locate the
brackets on which they will be installed. A pair of brackets should be
preinstalled in the chassis while a second pair should be provided
separately from the chassis as shown below:
Once identified, mount your hard drive(s) to the hard drive bracket using
two screws on each side of the hard drive as shown below:
Use two screws on each side
to mount each hard drive