Musical Fidelity M6 - Manual (Page 11)

Issue 1 July 2009 Page 11 of 18
PLAY 1
cd
PLAY 17
cd
PLAY 17 0:01
cd
INVALID TRACK
STOP
Playback can be stopped at any time by pressing the STOP button once. On the remote control, press either
end of the button, not the middle part. If mains power to the unit is switched on with a disc already loaded, it will
automatically search for the disc.
TRACK SELECTION
To change track, the track skip buttons PREVIOUS and NEXT on the front panel can be pressed to jump
forwards or backwards one track in either direction.
Corresponding TRACK buttons on the remote control are marked |<< and >>|.
If the unit has stopped playing, a specific track can be accessed directly by pressing either PREVIOUS or NEXT
to obtain the required track number, then pressing PLAY/PAUSE.
TRACK SELECTION (Remote control)
Simply press the PLAY button to start a CD playing from the first track.
Alternatively, a specific track can be selected directly by pressing one of the ten track number buttons grouped
in the centre-section of the remote control. The chosen track then plays after a short delay of about 5 seconds.
To play a track number with two digits, press the second digit button on the remote control within this delay
period, example for track 17:
Press 1:
Press 7 within about 5 seconds:
After a small pause, machine plays selected track:
If a track number is chosen which is not available on the disc, for example pressing button number 9 if the CD
has only 7 tracks, an INVALID TRACK message is briefly displayed.
OPERATION