Magnadyne REARVIEW MIRROR/MONITOR M35 - Manual (Page 4)

Installation Instructions
Mounting the Mirror/Monitor:
4
Maintenance
Though your Rearview Observation System requires little care, you can still maintain its condi-
tion and performance by follow these steps:
• Keep your system away from excessive moisture, extreme heat or cold, and magnetic fields.
• To avoid damage, do not place external devices or other objects on top of the mirror.
• Occasionally wipe the rearview mirror set with a soft cloth.
• Occasionally clean the surface of the mirror with a soft cloth and window cleaner.
1. Remove the M35’s mirror mount by loosing the mounting bracket screw.
2. Remove the factory mirror (do not use excessive force). Check to make sure that the fac-
tory’s mirror mount matches the M35’s mounting bracket. If the factory’s mounting bracket
does not fit the M35’s mounting bracket, replace the factory’s mirror mount with the M35’s
mirror mount.
3. Slide the mounting bracket onto the mirror mount. Move the bracket back and forth until the
M35 is completely seated.
4. Tighten the screw in the mounting bracket.
Mounting
Bracket
Screw
CAM
M35 Mirror Mount
Mounting
Bracket