Magnadyne REARVIEW MIRROR/MONITOR M35 - Manual (Page 6)

6
Troubleshooting
Symptoms
Solutions
The mirror/monitor does not power On
after car is started. • Check the installation-wiring diagram.
• Ensure that the parallel red and black line
from the control box is connected properly.
• Check for 12 volts on the brown wire
while the ignition is on.
No video signal appears while reversing
the car. • Check the rearview camera, cable and con-
nector.
• Check to verify that the cable from rearview
camera is securely connected.
• Check the wiring with the wiring diagram
(page 5).
Video image is not sharp enough. • Check the camera lens.
Specifications
General
Power Supply: 12VDC
Power Consumption: <6W Max.
Current Draw: <800mA
Video Input: 1Vp-p/75 Impedance
Operating Temperature Range: -10 to 60 Degrees C
Display
Screen: 4.3” TFT Color LCD
Brightness: 400cd
Contrast Ratio:
250:1
Backlight Life: 10,000 Hours
Resolution: 480 x 272
Video Format: PAL/NTSC Auto Detect
Display Format: 16:9