Motorola 68014301013 - Manual (Page 12)

10 Installation
Install third-party vehicle specific adapter harness
(if needed)
Some vehicles require a vehicle-specific adapter harness
(not supplied) that allows integration of the harness into the
vehicle entertainment system. The connectors on the ISO
cable are designed to connect directly to such a third-party
harness. If you choose to use a vehicle-specific harness,
follow the guidelines provided with that harness.
Install the ISO cable
Failure to follow these steps may result in product
malfunction or damage.
1 Disconnect battery from vehicle.
Caution: Removing battery power may set trouble
codes that can only be reset by a factory diagnostic
tool on some vehicles. Please check with your vehicle
manufacturer if you are unsure how your vehicle may
react.
2 Disconnect appropriate connections on the vehicle
entertainment system to allow installation of the ISO
cable (and adapters, if needed).
3 Connect cable connectors H and I to the vehicle
entertainment system (or adapters, if needed).
4 Connect cable connector G to the vehicle wiring
harness ISO connectors (or adapters, if needed).
5 Connect cable connector F to vehicle integration kit
connector A (shown on page 4).
Note: Make sure cable connector is plugged all the
way into the vehicle integration kit.
6 If needed, the connection points for mute, battery and
ignition can be configured to match your vehicle’s
harness using the alternate connection points on the
ISO harness.
7 Reconnect battery to vehicle.
Install to auxiliary input (optional)
If you wish to connect your car kit's music audio output to a
stereo auxiliary input on your vehicle entertainment
system:
should be no gap
between connector
and housing