Motorola 68014301013 - Manual (Page 13)

11 Installation
Note: Not all vehicle entertainment systems offer a stereo
auxiliary audio input. In some cases, if your system does
not support this input, one may be created using an adapter
from a third-party vendor.
1 Connect an RCA cable (not supplied) to connector E on
the ISO cable.
2 Connect the other connectors on the RCA cable to the
vehicle entertainment system’s Auxiliary input.
3 From the Installer menu, set the Line Out parameter to
ON (see “Set install preferences” on page 11 for
details).
Set install preferences
1 Turn off your vehicle’s ignition.
2 Turn on your vehicle’s ignition while pressing and
holding the Green button for at least 5 seconds.
Note: See page 13 for location of buttons and knobs
on UIM.
3 Use the scroll knob to view and change settings.
4 Turn vehicle’s ignition off and on to store settings.
Installer Menu
Setting...
Language set language displayed on the UIM.
Display
Orientation set the display orientation for left- or
right-hand operation.
Line Out set to ON when using an auxiliary
input to your vehicle entertainment
system for music.
Privacy Mute set whether to unmute the vehicle
entertainment system when a call is
switched to privacy mode.
Install Test test and verify:
ignition source
left-side speakers
right-side speakers
auxiliary input to vehicle
entertainment system (if used).
Factory
Reset reset all settings back to standard
default factory settings
About list car kit’s software version