Magellan eXplorist 500 - Manual (Page 78)

6. Highlight
<Add Point>.
7. Press ENTER.
Note: Any previous area calculations you did are saved in memory and will be
displayed. To create a new area calculation you will first need to delete all of the
POIs from the list. How to delete all of the POIs will be explained following these
instructions.
8. Using the POI database, select a stored POI.
9. Repeat steps 6 through 8 until you have a region defined.
10. The bottom of the display will alternate between the area and the perimeter of the
region you have defined.
Deleting All POIs from the Area Calculation List
1. While viewing the Area Calculation screen, press MENU.
2. Highlight
Delete All Points.
3. Press ENTER.
4. All of the POIs in the list are removed and you can now create a new region to be
calculated.
Editing the POI List in Area Calculation
You can insert, delete, or replace a POI in the area calculation list.
1. Use the Arrow joystick to highlight the POI in the list that you want a new POI
added before, deleted, or replaced.
2. Press MENU.
3. Use the Arrow joystick to highlight
Insert Above, Delete, or Replace.
4. Press ENTER.
5. If you select
Insert Above or Replace, you will select a POI from the POI
database.
Advanced Features 71