MITSUBISHI ELECTRIC DX-TL4709U - Manual (Page 16)

12
Setting the time and date
Time/Date Setting
This function is used to set the present date, time, and auto
daylight saving. Auto daylight saving function is used to auto-
matically gain an hour for the specifi ed time period.
Start/end time of the auto daylight savings can be checked
and if needed, changed.
Before you start recording, accurately set the present
date and time.
The recording and playback are not performed properly
when the clock of this unit does not run. Check that the
clock of this unit is running before operation.
steps 1, 2
step 3
D
System 4
1
Day Light Saving Setting
Setup Menu
Time/Date Setting
step 1. Set the present month, date, year, hour, minute, and
second.
step 2. Select the desired setting for daylight saving.
Auto: Automatically adjust forward or back an
hour for the time period set in the <Day Light
Saving Setting>.
Off: Auto daylight saving function is not used.
step 3. Date and time of Auto Day Light Saving Setting can
be adjusted as needed.
The time is indicated using the 24-hour system.
T h i s u n i t u s e s 4 d i g i t s t o d i s p l a y t h e y e a r. T h e
available display range is 37 years between January/01/2001
to December/31/2037. The unit is also equipped with a
function to automatically calculate leap years. The year re-
turns to 2001 after December/31/2037.