MITSUBISHI ELECTRIC DX-TL4709U User Manual
Page 35
Communications by Web Browser
31
When the multiple alarm signals are input at the same
time, only the picture from the camera corresponding to
the lowest sensor number is attached.
To view the attached picture:
In the PC with supplied application software installed,
click or double click the fi le.
In the PC without supplied application software installed,
drag
the
fi le and drop it into the “MPicViewer.exe” which
is stored in the supplied CD.
The displayed picture can be printed or can be saved in
general image formats.
step
5
-1
. (When setting the receiver’s address • • •)
Enter the desired e-mail address to “New Address.”
step
5
-2
. Set the contents to be transmitted from the recorder
to the PC.
• “Remain,” “Temp/Fan,” “Reboot,” “Record,”
“Alarm,” and “Sensor” settings can be set.
step
5
-3
. Select whether to activate or inactivate the e-mail
address you have set.
• When a check mark is put to “Active” column,
the selected e-mail address becomes active.
step
5
-4
. Select “set” and left-click.
step
5
-5
. Select “send” to send the test e-mail.
When the e-mail notifications or IP notifications have
been occurred frequently, the operation of the recorder
may become unstable.