CatEye MSC 3Dx - Manual (Page 2)

-2-
within 10cm
Important
The clearance between the sensors 23 and the
magnets qw should be about 5mm.
Align the center of the magnets qw and the sensor’s
marking line while rotating the wheel or crank.
Caution: Attach the sensor and the magnet within
10cm from the hub axle.
Speed Sensor and
Wheel Magnet
A B
Entire View
marking line
1
Parts Installation
Pay attention to the positions of the sensors and the magnets.
Parts Names
Make sure that the following parts are included in the package.
1 Bracket (Includes 3Dx attachment)
2 Speed Sensor (Short cord)
3 Cadence Sensor (Long cord)
4 Sensor Band A (L/S)
5 Sensor Band B
6 Nylon Ties
7 Sensor Rubber Pad
8 Bracket Rubber Pad
9 Bracket Rubber Pad with Holder
0 Screw
q Wheel Magnet
w Cadence Magnet
Cadence Sensor and
Cadence Magnet
Speed Sensor and Wheel Magnet
Cadence Sensor and
Cadence Magnet
1
5
6
10 8
11
9
12
4
3 2
7
3Dx attachment