32 timer recording, Helpful hints – Philips Magnavox CC13B1MG User Manual

Page 32

Advertising
background image

POWER

CLEAR

STATUS/EXIT

1

2

3

4

5

6

7

8

9

0

CHANNEL

SLEEP/WAKE UP

MUTE

SPEED

VOLUME

REW/SEARCH

PLAY/

FF/SEARCH

REC/OTR

PAUSE/STILL

STOP/

ALT.CH

MENU

MEMORY

32 Timer Recording

Follow the steps below to program the TV/VCR to record TV
programs while you’re away from home. The TV/VCR will turn
itself on, record, and turn itself off automatically. Before you begin,
make sure:

The clock is set. If not, CLOCK MUST BE SET appears, fol-
lowed by the SET CLOCK menu.

Channels are set up.

There is a tape in the TV/VCR. (Make sure the tape’s record
tab is intact and the tape is long enough to record the pro-
gram.)

Complete each step within 60 seconds of completing the
previous step. If you don’t, you may start again at step 1.

2

Press the PLAY/button or the STOP/button to select
VCR PROGRAM, then press the FF/SEARCH/
B button.

3

Press the PLAY/button or the STOP/button to select
a ONCE, DAILY, OR WEEKLY recording. Then, press
the FF/SEARCH/
B button.

ONCE: The TV/VCR will record a TV program on any day you
choose, up to 12 months away.

DAILY: The TV/VCR will record every day from Monday to
Friday – starting at the same time and recording the same channel
for the same length of time.

WEEKLY: The TV/VCR will record the same channel on the
same day, at the same time, and for the same length of time
every week.

1

Press the MENU button.

• With ShowGuard, you don’t have to

worry about losing your timer
recordings. If the power fails, pro-
grammed timer recordings will be
restored when the clock is reset.
(The clock will reset itself automati-
cally if you are using the AUTO
CLOCK feature. Details are on
pages 14-17. If you are not using
the AUTO CLOCK feature, reset the
clock manually. Details are on
pages 12-13.) The timer recording
will not occur only if the timer
recording was scheduled to take
place during the power failure.

• You cannot set a timer recording if

DEFEAT RECORDING is set to ON.
Details are on page 36.

Helpful Hints

>

PRIM. SETUP

VCR PROGRAM
VCR SETUP
CAPTION
REMINDER
BRIGHTNESS

PRESS

B

DAILY PROGRAM (MON-FRI)

PROGRAM -1 2 3 4 5 6 7 8-

SELECT PROGRAM NUMBER

TO END PRESS EXIT

Daily

Recording
(example)

VCR PROGRAM

>

ONCE
DAILY(MON-FRI)
WEEKLY
PROGRAM REVIEW

SELECT KL CHOOSE B
TO END PRESS EXIT

2-3

1

Advertising
This manual is related to the following products: