Philips Magnavox CC13B1MG - Manual (Page 34)

POWER CLEAR STATUS/EXIT
1 2 3
4 5 6
7 8 9
0
CHANNEL
SLEEP/WAKE UP
MUTE SPEED VOLUME
REW/SEARCH PLAY/ FF/SEARCH
REC/OTR PAUSE/STILL STOP/
ALT.CH
MENU
MEMORY
34 Timer Recording (cont’d)
Turn off the TV/VCR for the recording.
Insert a tape in the TV/VCR.
Leave the Cable Box/DBS on (if applicable).
8
Press the Number 1 button to record in SP speed or press
the Number 2 button to record in SLP speed. Details about tape
speed are on page 29. You cannot use the SPEED button at this time.
9
Press two Number buttons for the month and two Number
buttons for the day you want the program to record. For
example, for July 10, 2000, press 07, 10. The day of the week and the
year will be displayed automatically. (You cannot program the
TV/VCR to record more than one year in advance.)
If you selected a DAILY recording at step 3, you can not enter a date
that is a Saturday or Sunday.
ONE TIME PROGRAM
PROGRAM 1
CHANNEL 10
TIME ON 09:30 PM
TIME OFF 11:00 PM
REC SPEED SLP
SP=1 SLP=2
TO CORRECT PRESS CLEAR
TO END PRESS EXIT
ONE TIME PROGRAM
PROGRAM 1
CHANNEL 10
TIME ON 09:30 PM
TIME OFF 11:00 PM
REC SPEED SLP
START DATE 07/10/2000
MONDAY
TO CORRECT PRESS CLEAR
TO END PRESS EXIT
10
Press the STATUS/EXIT button. PROGRAM WAS COMPLET-
ED PLEASE TURN OFF FOR TIMER RECORDING will appear on
the screen.
● If there is not a tape in the TV/VCR, PLEASE INSERT CASSETTE
also appears on the screen.
● If there is a tape without a record tab in the TV/VCR, PLEASE
REMOVE CASSETTE also appears on the screen. If this happens,
insert a different tape.
● If PROGRAM NOT COMPLETED appears, start again at step 1.
11
Press the POWER button to turn off the TV/VCR power. The
RECORD light will flash slowly. If you forget to turn off the TV/VCR,
PLEASE TURN OFF FOR TIMER RECORDING appears on the
TV/VCR screen two minutes before a timer recording is scheduled to
begin.
• PROGRAM NOT COMPLETED /
CLASH may appear on the screen
when you finish setting a timer
recording. This means that the timer
recording you just programmed and
another timer recording overlap, and
thus the current timer recording will
not be carried out.
• To stop a timer recording that is in
progress, press the STOP/EJECT but-
ton on the TV/VCR.
To cancel the recording so that it will
not resume when the TV/VCR power
is turned off, clear the timer record-
ing. Details are on page 35.
Please see page 54 for more
Helpful Hints.
Helpful Hints
11
9
10
8