Motorola T5900 - Manual (Page 15)

Getting
Star
ted
13
Battery Meter
The battery icon shows the battery charge level, from full
d to empty a .
When the battery is empty, the radio chirps periodically after releasing
M
.
The radio powers off when the voltage drops below a predetermined level to
protect the rechargeable battery.
Note: Remove the batteries before storing your radio for extended periods of
time. Batteries corrode over time and may cause permanent damage to your
radio.
Using the Desk Stand Charger (Optional Accessory)
The desk stand charger provides drop-in charging convenience for NiCd batteries
and can be placed on any flat surface, such as a desk or workbench. Charge the
NiCd battery overnight (at least 16 hours) before using it for the first time. After
the initial charge, an empty battery is fully charged within 14 hours.
1. Turn the radio off and remove the battery cover.
2. Remove the battery pack from the clear plastic bag.
Do not disassemble or unwrap the battery pack.
3. Insert the NiCd battery pack so the metal contacts on the side of the battery
are facing outward from the radio to connect with the contacts on the battery
door.
4. Reposition the battery cover and press down to secure.
5. Plug the AC power supply into the plug on the desk stand.
4110w17b.book Page 13 Monday, August 18, 2003 3:01 PM