Motorola T5900 - Manual (Page 21)

Spe
c
ial Fea
tu
re
s
19
Special Features
Interference Eliminator Codes
Interference Eliminator Codes help minimize interference by providing a choice of
code combinations. Your radio has 99 Interference Eliminator Codes.
Codes 1–38 are the standard codes that appear on other FRS/GMRS radios.
Codes 39–99 are additional digital codes added for superior interference
protection.
To set the code for a channel:
1. Press
\ until the code starts to flash.
2. Press ] or [ to select the code.
3. Press
M
to save the code setting.
You can set a different code for each channel using this procedure. An extended
press of
] or [ allows you to scroll through the Interference Eliminator Codes
rapidly so you can quickly reach the code you want.
Note: You must set the Interference Eliminator Code to 0 on a radio that uses
Interference Eliminator Codes to communicate with radios that do not have
Interference Eliminator Codes.
Push to Talk Timeout Timer
To prevent accidental transmissions and save battery life, the radio emits a
continuous warning tone and stops transmitting if you press
M
for 60 continuous
seconds.
4110w17b.book Page 19 Monday, August 18, 2003 3:01 PM