Miele DG2661 - Manual (Page 46)

The steam generator is difficult to insert or remove.
Issue Fix
The connection valve at the steam
connector needs to be lubricated. Lubricate the connection valve with a
small amount of the supplied silicone
grease. See "Cleaning and Care -
Connection valve".
The heating phase takes an unusually long time.
Issue Fix
Check the bottom of the steam
generator. If there are calcium deposits,
check the water hardness level setting. Set the level to the water hardness in
your area. See "Setting the water
hardness". Descale the steam oven as
described in "Descale".
If the water hardness is set correctly or
if the problem persists, call Technical
Service.
The oven does not change from the heating to cooking phase after
relocation.
Issue Fix
The oven must be reset to a new
location and/or boiling temperature of
the water. See "Setting the altitude".
A great deal of steam comes out of the appliance while in use, or steam
comes out of unusual locations.
Issue Fix
The door is not properly closed. Close the door.
The door gasket does not fit properly. Press it on, so it fits evenly.
The door gasket is damaged. The gasket must be replaced.
If the problem persists, call Technical
Service.
Frequently asked questions
46