Motorola TETRA MTM800 - Manual (Page 26)

24
Engli
s
h
Emergency Mode
You can send and receive Emergency Group Calls in
Trunked Mode (TMO) or in Direct Mode (DMO). If your terminal is
configured to operate through a gateway, Emergency calls can be
placed through the gateway.
You can initiate an Emergency Group Call to and receive it from the
selected talkgroup (TMO and DMO).
Your Service Provider will configure the Emergency Alarm and Hot
Microphone features.
Emergency calls will be allocated emergency priority in the system.
Entering or Exiting Emergency Mode (TMO & DMO)
To enter Emergency mode from any mode, press and hold the
emergency key
.
To exit Emergency mode, press and hold Back. You will switch to
normal Group mode.
Invisible Emergency Mode
If the Invisible Emergency Mode is enabled by your Service
Provider, all the audible and visible indications for operations in
Emergency Mode are disabled.
Sending an Emergency Alarm
Your MTM800 will automatically send an Emergency Alarm when in
Emergency mode. This is sent:
• automatically, upon entering Emergency mode
The required time you need to press the Emergency button is set to
default to 0.5 seconds. The time can be configured by your Service
Provider.
For call alerts, see settings in the Tones menu option.
Only the Emergency Private Call is exception for this feature.