Model Shipways 2021 - Manual (Page 5)

5
BEFORE YOU BEGIN
The model is a waterline type ( no hull
below the waterline ). At 1/8" scale, it
makes a fine shelf model mounted on a
"sea" baseboard. It can also be used ef-
fectively in an HO gauge model railroad
setting. Although HO is 1/87 scale, 1/8"
( or 1/96) is close enough for the HO
layout. What you will have is slightly
smaller boat.
This kit contains a solid hull which has
been machined carved from select,
medium hard, fine grained basswood.
This style hull provides a quick and easy
lesson in the basic shapes and propor-
tions of hull design and helps to develop
woodworking skills. The exterior of the
TAURUS hull has been carved close to
the intended shape, so a simple sanding
is all that is required. Some carving is re-
quired for the bulwarks. Shaping and
finishing the hull to its final shape are
discussed in the instructions.
If you are a beginner, take your time. This
model is fairly simple to build but still re-
quires some time and concentration.
Make sure you complete one stage before
moving to the next. When things go
awry, consider doing it over. Completing
this model will prepare you for a more
complicated solid hull model such as the
Fishing Schooner ELSIE or the Colonial
Schooner SULTANA. Good luck!