MITSUBISHI ELECTRIC XD80U - Manual (Page 19)

E-18
R
L
AUDIO OUT
Connecting Personal Computers and Video Equipment
Connections with the AUDIO Jack
* Connect to the projector’s AUDIO jack using a commercially available audio cable. If the other device has an RCA phono type
audio jack, connect via a commercially available audio converter cable. Please attach the supplied ferrite core to the audio
cable as described below.
* The built-in speaker of the projector provides monaural audio. To enjoy convincing audio reproduction, please connect the
audio output of the video equipment to your audio system.
* The built-in speaker outputs the audio of the equipment connected to the AUDIO jack.
White
Red
Audio conversion cable
(Mini-jack/ RCA pin plug)
(Not supplied)
Audio cable (Mini plug)
(Not supplied)
Audio cable (Mini plug)
(Not supplied)
Cable
Ferrite core
Mounting the Ferrite Core
Open the ferrite core, loop the cable through it, then close.
Ferrite core (Supplied item)
(Mount to projector side of cable)
Ferrite core (Supplied item)
(Mount to projector side of cable)