Miele G 1202 - Manual (Page 12)

Programming the water
softener
To exit the programming mode at
any time, turn the dishwasher off
with the "
K" button.
^ Turn the dishwasher off with "K".
^ Press and hold the "Program" and
"Start / Stop" buttons simultaneously
turn the dishwasher on with "
K". Hold
the "Start / Stop" button until the "Start
/ Stop" indicator lights.
If it does not come on, start over.
^ Press the "Delay Start" button twice.
The "Delay Start" indicator flashes twice
in intervals.
"
p 1 5" flashes in the time display.
A water hardness setting of 15 °d is set
(factory default).
The set value is indicated in the time
indicator following "
p" (see table).
°d gr/gal Setting in display
1
2
3
4
5
6
7
8
9
10
11
12
13
14
15
16
17
18
19
20
21
22
23
24
25
26
27
28
29
30
31
32
33
34
35
36
37-45
46-60
61-70
1
2
3
4
5
6
7
8
9
10
11
12
13
14
15
16
17
18
19
20
21
22
23
25
26
27
28
29
30
31
32
33
34
35
36
37
38-46
47-62
63-73
1
2
3
4
5
6
7
8
9
10
11
12
13
14
15
16
17
18
19
20
21
22
23
24
25
26
27
28
29
30
31
32
33
34
35
36
45
60
70
^ Press the "Start / Stop" button to
select the value which corresponds
with the water hardness in your area.
With each press of the key the value
will raise. Once the highest value is
reached the values will start again
from the beginning.
Turn the dishwasher off with "
K".
Before using for the first time
12