Miele G 1202 - Manual (Page 33)

Default settings
All settings can be reset to the factory
default.
^ Turn the dishwasher off "K".
^ Press and hold the "Start/Stop" button
and at the same time turn the
dishwasher on "
K". Hold the
"Start/Stop" button until the
"Start/Stop" indicator lights up.
If it does not come on, start over.
^ Press the "Delay Start" button 12
times.
The "Delay Start" indicator gives on long
flash and two short flashes in intervals.
The time display shows if a setting was
changed.
– "
p 1": All settings are factory default.
– "
p 0": At least one setting was
changed.
^ To reset the dishwasher to the factory
default settings, press the "Start/Stop"
button.
The setting is saved.
^ Turn the dishwasher off "K".
Additional options
33