Motorola XV2100 User Manual
Page 33
21
Pr
ogra
mming Mode
k
Scramble Code
(2-watt models only)
Your radio has the Scramble feature, which makes your transmissions sound
garbled to anyone listening without the same code. It doesn’t guarantee
confidentiality, but it adds an extra layer of privacy.
•
Make sure k is accessed. Please refer to page 11.
•
Press \ as needed until e is displayed.
•
Then press [ or ] to choose the Scramble Code.
•
Select code 1, 2, or 3. Factory Default is set to Off: 0.
When you exit k, radio displays e.
Bandwidth (when FCC allowable)
Some frequencies have selectable channel spacing, which must match other radios
for optimal radio quality.
Note: Spirit GT radios operate on 12.5 kHz Bandwidth C, while M series operate
on 25.0 kHz Bandwidth D. Make sure k is accessed. Please refer to
page 11.
•
Change the setting by pushing the \ until K displays.
•
Bandwidth is only selectable when flashing.
•
Press [ or ] to select setting:
Either D (high: 25.0 kHz) or C (low: 12.5 kHz) will display.
e
0
K
C
6881038B80.book Page 21 Wednesday, September 26, 2001 4:16 PM