M-AUDIO 49I - Manual (Page 6)

KeyStudio 49i Quick Start Guide 6
|
MIDI Connections
You can connect the KeyStudio 49i MIDI output to an external MIDI device’s MIDI
input. This enables you to control an external synthesizer or sound module while
using KeyStudio 49i as a standalone keyboard controller. A sustain pedal can also
be connected to the 1/4” Sustain pedal jack on the back of KeyStudio.
Driver Installation for KeyStudio 49i
KeyStudio 49i functions as a class-compliant device. This means your computer
will recognize KeyStudio 49i without the need to install additional drivers. This gives
immediate access to all audio inputs and outputs as well as to the built-in MIDI
interface. As you become more familiar with the KeyStudio keyboard, you may wish
to take advantage of this product’s additional professional features by installing the
KeyStudio 49i drivers.
Installing the KeyStudio ASIO drivers in Windows improves audio performance by
reducing Latency. Latency is the time it takes for MIDI input (when using software
synthesizers) or audio input signal to appear as audio at your computer’s outputs for
monitoring purposes. In Windows, additional features also include: using your new
keyboard with more than one application at the same time (multi-client), sending
large SysEx messages, or using your KeyStudio 49i with Pro Tools M-Powered
recording software or the included GM Module software.
On a Macintosh computer, installing the M-Audio drivers enables you to use your
KeyStudio 49i with Pro Tools M-Powered recording software.
Windows XP and Windows Vista (32-bit editions)
PLEASE NOTE: If you are installing drivers for KeyStudio 49i on your
Windows XP or Windows Vista computer, disconnect your KeyStudio until
you are instructed to connect it.
To install drivers for KeyStudio 49i:
1. Insert the M-Audio KeyStudio 49i CD-ROM into your computer’s CD-ROM
drive.
2. The computer will automatically display the interactive install screen. If your
computer fails to launch the installer, manually start it by clicking Start > My
Computer, and double-clicking KeyStudio 49i.
3. Choose the KeyStudio 49i keyboard from the pull down menu and click
"Install."