M-AUDIO 49I - Manual (Page 9)

KeyStudio 49i Quick Start Guide
|
9
Installation of the M-Audio GM Module Software
Windows XP and Windows Vista (32-bit editions)
1. Insert the M-Audio KeyStudio 49i CD-ROM into your computer’s CD-ROM drive.
2. The computer will automatically display the interactive install screen. If your
computer fails to launch the installer, manually start it by clicking Start > My
Computer, and double-clicking KeyStudio 49i.
3. Choose M-Audio GM Module from the pull down menu and click "Install."
4. Follow the installer’s on-screen direction prompts.
5. During setup, the installer will ask you to specify two directories on your
computer. The first is for the GM Module Data directory (approximately 350
MB) and the second is for your VST plug-in directory. You may specify a custom
location, or use the default setting.
6. When the installer finishes installing the software, click “Finish.”
7. M-Audio GM Module is now installed on your computer.
Note: The GM Module software requires the KeyStudio 49i hardware to be
connected and its drivers to be installed in order to operate in Windows.
Macintosh OS X
1. Insert the M-Audio KeyStudio 49i CD-ROM in your computer’s CD-ROM drive.
2. A CD-ROM icon will appear on your desktop once the disc is inserted into your
computer. Double-click this icon to view the contents of the disc.
3. Double-click the “Open Me” icon.
4. Select “GM Module” from the drop-down menu and click “Install.”
5. The software installer will launch. Follow the on-screen direction prompts. During
Installation, Mac OS X will ask you to enter your user name and password. Enter this
information and click OK to confirm. If you have not configured a password for your
computer, leave the password field blank and click OK. If you are not the computer’s
owner, ask the owner or your Administrator for the missing information.
6. The M-Audio GM Module is now installed on your computer.