3. adjusting engine speed (standard models only) – Miller Electric 145 DXR User Manual
Page 31
Advertising
.
Complete Parts List available at www.MillerWelds.com
OM-4417 Page 27
8-3. Adjusting Engine Speed (Standard Models Only)
803 594-B
Tools Needed:
3750
±
30 rpm (62 Hz)
After tuning engine, check engine
speed. See table for proper no load
speed. If necessary, adjust speed
as follows:
Start engine and run until warm.
1
Adjustment Screw
To increase speed, turn screw in
(clockwise). To decrease speed,
turn screw out (counterclockwise).
!
Stop engine. Close fuel
valve.
1
Advertising
This manual is related to the following products: