Medion MD80566 - Manual (Page 44)

44 44
Advanced Recording
Zooming In and Out
✤ Zooming is a recording technique that lets you change the size of the subject in a scene.
For more professional looking recordings, do not use the zoom function too often.
✤ You can zoom using variable zoom speeds.
✤ Use these features for different shots. Please note that over-use of the zoom feature can lead to unprofessional looking results
and a reduction of battery usage time.
1. Move the zoom lever slightly for a gradual zoom, move it further for a high-speed zoom.
Your zooming is monitored on the OSD.
2. T(Telephoto) side:
Subject appears closer.
3. W(Wide angle) side: Subject appears farther away.
■ You can record a subject that is about 10mm (about 0.5 inch) away from the lens surface in the WIDE position.
Tele MACRO
✤ Tele Macro Function works in CAMERA mode only.
✤ Effective focal distance in MACRO mode is 50 Cm (19.7 inches) ~ 100 Cm (39.4 inches).
1. Press the MACRO button.
■ MACRO Icon ( ) will be displayed.
2. If you want to cancel the Tele Macro function, press the MACRO button again.
Notes
■ When recording in MACRO Mode, the FOCUS speed may be slow.
■ When you operate the ZOOM function in the TELE MACRO mode, then the recording subject may
be out of focus.
■ Use a tripod to prevent hand shake in the TELE MACRO mode.
■ Avoid shadows when recording in the TELE MACRO mode.
■ As the distance to the subject decreases, focusing area narrows.
■ When you can not get proper focus, use the Zoom Lever.
MACRO
PB ZOOM
0 : 2 3 : 4 7
STBY
TELE
WIDE
1-1 1-2
00899A MD80566-UK (28~58) 5/23/05 8:05 AM Page 44