Medion MD80566 - Manual (Page 68)

68 68
Playback
✤ The playback function works in PLAYER mode only.
Playback on the LCD
✤ It is practical to view a tape using the LCD when in a car or outdoors.
Playback on a TV monitor
✤ To play back a tape, the television must have a compatible colour system.
✤ We recommend that you use the AC Power Adapter as the power source for the camcorder.
Connecting to a TV which has Audio/Video input jacks
1. Connect the camcorder and TV with the AUDIO/VIDEO cable.
■ The yellow plug : Video
■ The white plug : Audio(L)-mono
■ The red plug : Audio(R) - STEREO only
-
If you connect to a monaural TV or VCR, connect the yellow plug (Video) to
the video input of the TV or VCR and the white plug (Audio L) to the audio
input of the TV or VCR.
✤ You may use the SCART adapter (optional).
2. Set the power switch on the camcorder to PLAYER mode.
3. Turn on the TV and set the TV/VIDEO selector on the TV to VIDEO.
■ Refer to the TV or VCR user’s manual.
4. Play the tape.
Notes
■ You may use an S-VIDEO (optional) cable to obtain better quality pictures if you have a S-VIDEO connector on your TV.
■ Even if you use an S-VIDEO (optional) cable, you need to connect an audio cable.
■ If you connect the cable to the AV Jack, you will not hear sound from the Camcorder's speakers.
Tape Playback
S-VIDEO
MIC
A/V
DC IN
Camcorder
S-VIDEO
A/V
Video input-Yellow
Audio input
(left)-White
S-VIDEO input
(right)-Red
Audio input
TV
00899A MD80566-UK (59~86) 5/23/05 8:06 AM Page 68