McIntosh MDLP1 - Manual (Page 21)

21
The Default Settings Charts indicate the On-Screen Menu
Name, Function, Default Settings and the page number for
additional information.
Default Settings
Default Settings
MENU FUNCTION SETTING PAGE
Picture Mode Theater Default 24
Standard (Default) Default 24
Dynamic Default 24
User 1 24
Picture Adjust Gamma Standard 24
Contrast 0 24
Brightness 0 24
Color 0 24
Tint 0 24
Color Temp. 3 24
Lamp Mode Normal 25
Iris F6.0 25
Aspect Full 25
Fine Menu 1 Sharpness 0 26
Noise Reduction 0 26
R Gain 0 26
G Gain 0 26
B Gain 0 26
R Bias 0 26
G Bias 0 26
B Bias 0 26
Fine Menu 2 Cinema Auto 26
VCR Mode Off 26
Black Level Expand 26
FRC Auto 26
CEC Off 26
Picture Shift V 0 26
Luminance Gain 0 26
Chroma Delay 0 26
Input Signal Component 1 Auto 27
Component 2 Auto 27
HDMI 1 Auto 27
HDMI 2 Auto 27
CSC-HDMI 1 Auto 27
CSC-HDMI 2 Auto 27
MENU FUNCTION SETTING PAGE
RGB/HD Adjust Mode Auto 27
Readjust ---- 27
Resolution H 0 27
Resolution V 0 27
Position H 0 27
Position V 0 27
Phase 0 27
Clamp Position 0 27
Clamp Width 0 27
Display Keystone 0 23
Scale 0 27
Width 0 27
Position H 0 27
Position V 0 27
Overscan Enable 27
Installation Front 23
OSD/Blanking Menu Position Top-L 28
Language English 28
Status Info Enable 28
Power-Off Confirm Disable 28
Blanking Memory Off 28
Blanking Top 0 28
Blanking Bottom 0 28
Blanking Left 0 28
Blanking Right 0 28
Config. Auto Power Off Disable 28
Trigger 2 Full On 28
Trigger 2 Normal On 28
Trigger 2 Zoom On 28
Trigger 2 V-stretch On 28
Trigger 2 Through On 28
Remote Control Wireless 23
Reset Lamp Life No 29
Reset All No 29