M-AUDIO Studiophile BX5 - Manual (Page 6)

Front Panel
The front panel houses the Power LED, which indicates whether the speakers
(amplifier) power is on or off.
Installation
For optimal performance of the BX5, please read the following thoroughly and
carefully prior to installation.
Precautions
Handling: Please do not touch the speaker cones. The BX5 set is packaged in
the box tightly, so your attention is required when taking the monitors out of
the box. To avoid possible damage to the speaker units, hold both sides of the
monitor in order to pull it out of the box. The speaker cones should not be
touched in order to avoid damage even after they are out of the box.
Connections: Connect the XLR balanced or TRS balanced/unbalanced input of
each BX5 to the corresponding pre-amp, computer or game console outputs.
We recommend that you use high-quality balanced or unbalanced cables for
input connections. Also, turn off the power of the BX5 and turn the volume of
the BX5 down to a minimum before making the necessary connections.
6